ATEM Mini Pro Streaming Manual Service Streaming to Facebook (Live Feed)

🔑 Access Information

🕗 Service Schedule Overview

Action Deadline
Testing Stream (Private Group) Before 08:30
Live Stream Start (Main Page) 09:00 Sharp

🎥 Streaming Setup – Step-by-Step (ATEM Mini Pro)

BEFORE 08:30 – Testing Stream

  1. Turn on Equipment

    • Power up the ATEM Mini Pro, connected camera(s), and Mac.

    • Confirm all cables (HDMI, USB-C, power) are securely connected.

  2. Connect ATEM Mini Pro to Mac

    • USB-C connects to the Mac (for OBS or streaming software, if used).

    • Ethernet connects to the router (for direct network streaming).

  3. Open Facebook on Chrome or Safari

  4. Click “Live Video”

    • Select Streaming Software (not “Camera”).

    • Facebook will generate an RTMP Server URL and Stream Key.

  5. Open ATEM Software Control

    • Go to the Live Stream tab.

    • Choose Facebook.

    • Paste the Stream Key into the settings.

    • Set stream quality to Streaming Medium (4.5 Mbps) unless otherwise instructed.

  6. Start Test Stream

    • Click ON AIR in the ATEM Software Control.

    • Monitor the stream in the Test Group on another device.

    • Check:

      • Video clarity

      • Audio volume levels (especially voice)

      • Camera angle

  7. End Test Stream

    • Press OFF AIR in the ATEM Software Control once the test is complete.

    • Write down notes or feedback.

AT 09:00 – Live Stream to Main Page

  1. Return to Facebook Main Page

  2. Get New Stream Key

    • Facebook creates a new key for the live feed.

    • Copy and paste into ATEM Software Control.

  3. Double-check everything:

    • Stream Key is correct.

    • Audio levels are still stable.

    • Correct source is selected (Camera 1 or 2).

    • Lower thirds or ProPresenter overlays are ready if needed.

  4. Click ON AIR exactly at 09:00

    • Monitor the stream on your phone or second device.

    • Be ready to mute music if copyright content accidentally plays.

✅ Final Checks During Stream

  • Volume should be clear, not distorted.

  • Always check comments on Facebook for feedback.

  • If something fails:

    • Stop the stream.

    • Restart the ATEM Mini.

    • Re-paste stream key and go live again.

❌ Common Mistakes to Avoid

  1. Streaming to the wrong page or group
    ➤ Always double-check before going live.

  2. Using an old or expired Stream Key
    ➤ Always generate a new key before going live.

  3. Forgetting to check audio levels
    ➤ Do a sound test during the 08:30 trial run.

  4. Wrong camera angle or no camera feed
    ➤ Preview the feed on a second screen before going live.

  5. Streaming copyrighted music
    ➤ Always use songs from the BTM Music Folder or licensed sources.

💡 Tips & Tricks for Better Streaming

  • Use a phone or second device to monitor the stream in real time.

  • Use #hashtags to help visibility:

    • #BlazeTeamMinistries

    • #ChurchOnline

    • #SouthAfricaChurch

    • #SundayService

    • #LiveWorship

    • #ChristianStreaming

  • Tag the preacher or worship team when possible for engagement.

  • Add a simple description with the sermon theme (see below).

🗓️ Preparation – Before Streaming

  1. Check Planning Center

    • Confirm who is preaching.

    • Note the theme or sermon title.

    • Example:

      “Join us live for today’s message: “The Power of Grace” with Pastor [Name]. #SundayService #BlazeTeamMinistries”

  2. Confirm Slide and Video Readiness

    • Ensure Pre-service video is queued.

    • Ensure overlays (title slides) are updated.

  3. Pray before the stream begins.
    You’re helping carry the message to people who can’t be there physically!

PreviousNext